Version
Description
9.2(1.0)
Introduced on the Z9500.
9.0.0.0
Introduced on the Z9000.
8.3.19.0
Introduced on the S4820T.
8.3.7.0
Introduced on the S4810.
8.4.2.1
Introduced on the C-Series and S-Series.
8.4.1.0
Introduced on the E-Series TeraScale.
ipv6 name-server
Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order
of their use.
Z9500
Syntax
ipv6 name-server
ipv6-address
[
ipv6-address2... ipv6-address6
]
To remove a name server, use the
no ipv6 name—server ipv6–address
command.
Parameters
ipv6-address
Enter the IPv6 address (X:X:X:X::X) of the name server to be
used.
Note: The :: notation specifics successive hexadecimal fields
of zeros.
ipv6-address2...
ipv6-address6
(OPTIONAL) Enter up to five more IPv6 addresses, in the
x:x:x:x::x format, of name servers to be used. Separate the
IPv6 addresses with a space.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
1020
IPv6 Basics
