If you enable BFD at the interface level,
show ipv6 ospf interface
shows the BFD
interval timers.
Example
Dell#show ipv6 ospf 3 interface tengigabitethernet 1/2
TenGigabitEthernet 1/2 is up, line protocol is up
Link Local Address fe80::201:e8ff:fe17:5bbd, Interface ID
67420217
Area 0, Process ID 1, Instance ID 0, Router ID 11.1.1.1
NetworkType BROADCAST, Cost: 1, Passive: No
Transmit Delay is 100 sec, State DR, Priority 1
Interface is using OSPF global mode BFD configuration.
Designated router on this network is 11.1.1.1 (local)
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 1,
Retransmit 5
Dell#
show ipv6 ospf database
Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Z9500
Syntax
show ipv6 ospf [
process-number
] [vrf
vrf-name
] database
[database-summary | grace-lsa]
Parameters
process-
number
Enter the OSPF process number.
vrf
vrf-name
(Optional) Enter the keyword vrf followed by the name of the
VRF to display neighbors corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
database-
summary
(OPTIONAL) Enter the keywords
database-summary
to
view a summary of database LSA information.
grace-lsa
(OPTIONAL): Enter the keywords
grace-lsa
to display the
Type-11 Grace LSAs sent and received on an OSPFv3 router.
Defaults
none
Command
Modes
EXEC
EXEC Privilege
1364
Open Shortest Path First (OSPFv2 and OSPFv3)
