show ip bgp extcommunity-list
View information on all routes with Extended Community attributes.
Z9500
Syntax
show ip bgp [vrf
vrf-name
] [ipv4 {
multicast
|
unicast
} | ipv6
unicast
] extcommunity-list [
list name
]
Parameters
vrf
vrf-name
(OPTIONAL) Enter the keywords
vrf
and then the name of
the VRF to view information on all routes with extended
community attributes corresponding to that VRF.
ipv4
multicast
(OPTIONAL) Enter the keyword
ipv4
followed by the
keyword
multicast
to view information related only to ipv4
multicast routes.
ipv4
unicast
(OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
ipv6
unicast
(OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to view information related only to ipv6
unicast routes.
list name
Enter the extended community list name you wish to view.
The range is 140 characters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0)
Added support for VRF.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Border Gateway Protocol
461
