Related
Commands
snmp-server community
— sets the community string.
snmp-server user
Configure a new user to an SNMP group.
Z9500
Syntax
snmp-server user
name
{
group_name
remote
ip-address
udp-port
port-number
} [1 | 2c | 3] [encrypted] [auth {md5 | sha}
auth-
password
] [priv des56
priv password
] [access
access-list-name
|
ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]
To remove a user from the SNMP group, use the
no snmp-server user
name
{
group_name
remote
ip-address
udp-port
port-number
} [1 | 2c |
3] [encrypted] [auth {md5 | sha}
auth-password
] [priv des56
priv password
] [access
access-list-name
| ipv6
access-list-name
|
access-list-name
ipv6
access-list-name
]
command.
Parameters
name
Enter the name of the user (not to exceed 20 characters), on
the host that connects to the agent.
group_name
Enter a text string (up to 20 characters long) as the name of
the group. The following groups are created for mapping to
read/write community/security-names (defaults):
•
v1v2creadu
— maps to a community with
ro
permissions.
•
1v2cwriteu
— maps to a community
rw
permissions.
remote
ip-
address
Enter the keywords
udp-port
then the user datagram
protocol (UDP) port number on the remote device. The
range is from 0 to 65535. The default is
162
.
udp-port
port-
number
Enter the keywords
udp-port
then the UDP (User Datagram
Protocol) port number on the remote device. The range is
from 0 to 65535. The default is
162
.
1 | 2c | 3
(OPTIONAL) Enter the security model version number (
1
,
2c
,
or
3
):
•
1
is the least secure version.
•
3
is the most secure of the security modes.
•
2c
allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is
1
.
1724
Simple Network Management Protocol (SNMP) and Syslog
