Related
Commands
class-map
— identifies the class map.
match ip vlan
Uses a VLAN as the match criterion for an L3 class map.
Z9500
Syntax
match ip vlan
vlan-id
To remove VLAN as the match criterion, use the
no match ip vlan
vlan-id
command.
Parameters
vlan
vlan-id
Enter the keyword vlan and then the ID of the VLAN. The
range is from 1 to 4094.
Defaults
none
Command
Modes
CONF-CLASS-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.4.(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
To access this command, enter the
class-map
command. After the class map is
identified, you can configure the match criteria.
Use this command to match an IP class-map against a single VLAN ID .
Related
Commands
class-map
— identifies the class map.
match mac access-group
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
Z9500
Syntax
match mac access-group {
mac-acl-name
}
Parameters
mac-acl-name
Enter a MAC ACL name. Its contents is used as the match
criteria in the class map.
Quality of Service (QoS)
1495
