Usage
Information
The following Example specifies the group named
harig
as a version 3 user
requiring both authentication and encryption and read access limited to the read
named
rview
.
NOTE: The number of configurable groups is limited to 16 groups.
Example
Dell#conf
Dell(conf)# snmp-server group harig 3 priv read rview
Dell#
Related
Commands
show snmp group
— displays the group name, security model, view status, and
storage type of each group.
show running-config
— displays the SNMP running configuration.
snmp-server host
Configure the recipient of an SNMP trap operation.
Z9500
Syntax
snmp-server host
ip-address
|
ipv6-address
[traps | informs]
[version 1 | 2c | 3] [auth | no auth | priv] [
community-string
]
[udp-port
port-number
] [
notification-type
]
To remove the SNMP host, use the
no snmp-server host
ip-address
[traps | informs] [version 1 | 2c | 3] [auth | noauth | priv]
[
community-string
] [udp-port
number
] [
notification-type
]
command.
Parameters
ip-address
Enter the keyword
host
then the IP address of the host
(configurable hosts is limited to 16).
ipv6-address
Enter the keyword host then the IPv6 address of the host in
the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
traps
(OPTIONAL) Enter the keyword
traps
to send trap
notifications to the specified host. The default is
traps
.
informs
(OPTIONAL) Enter the keyword
informs
to send inform
notifications to the specified host. The default is
traps
.
version 1 | 2c |
3
(OPTIONAL) Enter the keyword version to specify the
security model then the security model version number
1
,
2c
, or
3
:
• Version
1
is the least secure version.
• Version
3
is the most secure of the security modes.
1718
Simple Network Management Protocol (SNMP) and Syslog
