Usage
Information
This command allows you to monitor adjacency state changes, which are useful
when you monitor large networks. Messages are logged in the system’s error
message facility.
lsp-gen-interval
Set the minimum interval between successive generations of link-state packets (LSPs).
Z9500
Syntax
lsp-gen-interval [level-l | level-2]
interval seconds
[
initial_wait_interval seconds
[
second_wait_interval seconds
]]
To restore default values, use the
no lsp-gen-interval [level-l |
level-2]
interval seconds
[
initial_wait_interval seconds
[
second_wait_interval seconds
]]
command.
Parameters
level-l
(OPTIONAL) Enter the keywords
level-1
to apply the
configuration to generation of Level-1 LSPs.
level-2
(OPTIONAL) Enter the keywords
level-2
to apply the
configuration to generation of Level-2 LSPs.
interval
seconds
Enter the maximum number of seconds between LSP
generations. The range is from 0 to 120 seconds. The default
is
5 seconds
.
initial_wait_inte
rval seconds
(OPTIONAL) Enter the initial wait time, in seconds, before
running the first LSP generation. The range is from 0 to 120
seconds. The default is
1 second
.
second_wait_i
nterval seconds
(OPTIONAL) Enter the wait interval, in seconds, between the
first and second LSP generation. The range is from 0 to 120
seconds. The default is
5 seconds
.
Defaults
Refer to
Parameters
.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
1096
Intermediate System to Intermediate System (IS-IS)
