dot1x tx-period
Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.
Z9500
Syntax
dot1x tx-period
seconds
To return to the default, use the
no dot1x tx-period
command.
Parameters
seconds
Enter the interval time, in seconds, that EAPOL PDUs are
transmitted. The range is from 1 to 65535. The default is
30
.
Defaults
30
seconds
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
7.6.1.0
Introduced on the C-Series and S-Series.
7.4.1.0
Introduced on the E-Series.
show dot1x cos-mapping interface
Display the CoS priority-mapping table the RADIUS server provides and applies to authenticated
supplicants on an 802.1X-enabled system.
Z9500
Syntax
show dot1x cos-mapping interface
interface
[mac-address
mac-
address
]
208
802.1X
