Dell Networking Z9500, Command Reference Manual

Page: 1451 / 1905

The following describes the
show interfaces private-vlan
command shown
in the Examples below.
Field Description
Interface Displays the type of interface and associated slot and port
number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface
resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
Example (All)
Dell# show interfaces private-vlan
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Fo 1/52 30 Isolated Host Up
Fo 2/12 20 Community Host Up
Po 10 10 Primary Trunk Up
Example
(Specific)
Dell# show interfaces private-vlan te 2/2
Interface Vlan PVLAN-Type Interface Type Status
--------- ---- ---------- -------------- --------
Te 2/2 100 Isolated Host Up
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show vlan private-vlan – displays the PVLANs and/or interfaces that are part of a
PVLAN.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan
Display PVLAN configurations, including member interfaces, type, and status.
Z9500
Syntax
show vlan private-vlan [ vlan-id | community vlan-id | interface
interface | isolated vlan-id | mapping vlan-id | primary vlan-
id ]
Parameters
vlan-id (OPTIONAL) Enter a VLAN ID number to display the PVLAN
configuration.
Private VLAN (PVLAN)
1451