Version
Description
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Related
Commands
protocol spanning-tree rstp
— enters SPANNING TREE mode on the switch.
forward-delay
Configure the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
Z9500
Syntax
forward-delay
seconds
To return to the default setting, use the
no forward-delay
command.
Parameters
seconds
Enter the number of seconds that the system waits before
transitioning RSTP to the forwarding state. The range is from
4 to 30. The default is
15 seconds
.
Defaults
15 seconds
Command
Modes
CONFIGURATION RSTP (conf-rstp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Rapid Spanning Tree Protocol (RSTP)
1581
