Parameters
address
Enter a single address to be excluded from the pool.
low-address
Enter the lowest address in a range of addresses to be
excluded from the pool.
high-address
Enter the highest address in a range of addresses to be
excluded from the pool.
Defaults
none
Command
Modes
DHCP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the C-Series and S-Series.
hardware-address
For manual configurations, specify the client hardware address.
Z9500
Syntax
hardware-address
address
Parameters
address
Enter the hardware address of the client.
Defaults
none
Command
Modes
DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
710
Dynamic Host Configuration Protocol (DHCP)
