Related
Commands
•
dot1x auth-fail-vlan
•
dot1x reauthentication
•
dot1x reauth-max
•
show dot1x interface
dot1x host-mode
Enable single-host or multi-host authentication.
Z9500
Syntax
dot1x host-mode {single-host | multi-host | multi-auth}
Parameters
single-host
Enable single-host authentication.
multi-host
Enable multi-host authentication.
multi-auth
Enable multi-supplicant authentication.
Defaults
single-host
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
8.4.1.0
Added the
multi-auth
option on the C-Series and S-
Series.
8.3.2.0
Added the
single-host
and
multi-host
options on the
C-Series, E-Series, and S-Series.
Usage
Information
• Single-host mode authenticates only one host per authenticator port and drops
all other traffic on the port.
• Multi-host mode authenticates the first host to respond to an Identity Request
and then permits all other traffic on the port.
802.1X
199
