Version
Description
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for the Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
Related
Commands
show ip ospf statistics
— displays the OSPF statistics.
debug ip ospf
Display debug information on OSPF. Entering the
debug ip ospf
commands enables OSPF debugging
for the first OSPF process.
Z9500
Syntax
debug ip ospf
process-id
[bfd |event | packet | spf | database-
timer rate-limit]
To cancel the debug command, use the
no debug ip ospf
command.
Parameters
process-id
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
bfd
(OPTIONAL) Enter the keyword
bfd
to debug only OSPF BFD
information.
event
(OPTIONAL) Enter the keyword
event
to debug only OSPF
event information.
packet
(OPTIONAL) Enter the keyword
packet
to debug only OSPF
packet information.
spf
(OPTIONAL) Enter the keyword
spf
to display the Shortest
Path First information.
database-timer
rate-limit
(OPTIONAL) Enter the keywords
database-timer rate-
limit
to display the LSA throttling timer information. This
applies to the S4810 platform only.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3)
1259
