ipv6 unicast
(OPTIONAL) Enter the keyword
ipv6
followed by the
keyword
unicast
to view information related only to ipv6
unicast routes.
ip-address
(OPTIONAL) Enter the IP address of the neighbor to view
only BGP information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords
advertised-routes
to
view only the routes the neighbor sent.
dampened-
routes
(OPTIONAL) Enter the keywords
dampened-routes
to view
information on dampened routes from the BGP neighbor.
detail
(OPTIONAL) Enter the keyword
detail
to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics
(OPTIONAL) Enter the keywords
flap-statistics
to view
flap statistics on the neighbor’s routes.
routes
(OPTIONAL) Enter the keyword
routes
to view only the
neighbor’s feasible routes.
received-
routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords
received-routes
then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
received from neighbors.
NOTE: Configure the
neighbor soft-
reconfiguration inbound
command prior to
viewing all the information received from the neighbors.
denied-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords
denied-routes
then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied via neighbor inbound filters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Added the ipv4 multicast and ipv6 unicast parameters.
9.4.(0.0)
Added support for VRF.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
Border Gateway Protocol
469
