to Router2. This is a
port connected to
IF-MIB::ifAlias.134792448 = STRING:
!----command run on Force10 switch:-----------!
Dell#snmp ifmib ifalias long
!----command run on server connected to switch:------!
> snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i
alias | more
IF-MIB::ifAlias.134530304 = STRING: This is a port connected
to Router2. This is a
port connected to Router2. This is a port connected to
Router2. This is a port
connected to Router2. This is a port connected to Router2.
IF-MIB::ifAlias.134792448 = STRING:
snmp-server community
Configure a new community string access for SNMPv1 v2 and v3.
Z9500
Syntax
snmp-server community
community-name
{ro | rw} [ipv6
ipv6-
access-list-name
[ipv6
ipv6-access-list-name
|
access-list-name
| security-name
name
] | security-name
name
[ipv6
ipv6-access-
list-name
|
access-list-name
| security-name
name
] |
access-
list-name
[ipv6
ipv6-access-list-name
|
access-list-name
|
security-name
name
]]]
To remove access to a community, use the
no snmp-server community
community-string
{ro | rw} [security-name
name
[
access-list-
name
| ipv6
access-list-name
|
access-list-name
ipv6
access-
list-name
]]
command.
Parameters
community-
name
Enter a text string (up to 20 characters long) to act as a
password for SNMP.
ro
Enter the keyword
ro
to specify read-only permission.
rw
Enter the keyword
rw
to specify read-write permission.
ipv6
access-
list-name
(Optional) Enter the keyword
ipv6
then an IPv6 ACL name (a
string up to 16 characters long).
security-name
name
(Optional) Enter the keywords
security-name
then the
security name as defined by the community MIB.
access-list-
name
(Optional) Enter a standard IPv4 access list name (a string up
to 16 characters long).
Defaults
none
Command
Modes
CONFIGURATION
1710
Simple Network Management Protocol (SNMP) and Syslog
