Related
Commands
disable
— globally disables GVRP.
gvrp registration
Configure the GVRP register type.
Z9500
Syntax
gvrp registration {fixed | normal | forbidden}
To return to the default, use the
gvrp register normal
command.
Parameters
fixed
Enter the keyword
fixed
then the VLAN range in a comma-
separated VLAN ID set.
normal
Enter the keyword
normal
then the VLAN range in a
comma-separated VLAN ID set. This setting is the default.
forbidden
Enter the keyword
forbidden
then the VLAN range in a
comma-separated VLAN ID set.
Defaults
normal
Command
Modes
CONFIGURATION-INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on C-Series, E-Series, and S-Series
Usage
Information
Fixed registration prevents an interface, configured using the command line, to
belong to a VLAN (static configuration) from being unconfigured when it receives a
Leave
message. Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port’s membership in the VLAN
depends on GVRP. The interface becomes a member of a VLAN after learning
798
GARP VLAN Registration (GVRP)
