Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
Usage
Information
When you enable
logging synchronous
, unsolicited messages appear between
software prompts and outputs. Only the messages with a severity at or below the
set level are sent to the console.
If the message queue limit is reached on a terminal line and messages are
discarded, a system message appears on that terminal line. Messages may continue
to appear on other terminal lines.
Related
Commands
logging on
— enables logging.
logging trap
Specify which messages are logged to the Syslog server based the message severity.
Z9500
Syntax
logging trap [
level
]
To return to the default values, use the
default logging trap
command.
To disable logging, use the
no logging trap
command.
Parameters
level
Indicate a value from 0 to 7 or enter one of the following
parameters:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
. The default is
6
or
informational
.
Defaults
6
or
informational
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
1744
Simple Network Management Protocol (SNMP) and Syslog
