Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
Usage
Information
If the flowlabel value is already set for BGP or SSH, the system defaults to the
already configured value. All packets on the same connection are considered part
of the same flow by the system. For new connections, set the new flowlabel to
zero.
ipv6 host
Assign a name and IPv6 address the host-to-IPv6 address mapping table uses.
Z9500
Syntax
ipv6 host name
ipv6-address
To remove an IP host, use the
no ipv6 host name {ipv6–address}
.
Parameters
name
Enter a text string to associate with one IP address.
ipv6-address
Enter the IPv6 address (X:X:X:X::X) to be mapped to the
name.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
IPv6 Basics
1019
