interface
Enter the keyword
interface
to enable debugging of
interface state changes..
ipv6
Enter the keyword
ipv6
to enable debugging for IPv6.
packets
Enter the keyword
packets
to enable debugging of VRRP
control packets.
state
Enter the keyword
state
to enable debugging of VRRP state
changes.
timer
Enter the keyword
timer
to enable debugging of the VRRP
timer.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Usage
Information
If no options are specified, debug is active on all interfaces and all VRRP groups.
description
Configure a short text string describing the VRRP group.
Z9500
Syntax
description
text
To delete a VRRP group description, use the
no description
command.
Parameters
text
Enter a text string up to 80 characters long.
Defaults
Not enabled.
1886
Virtual Router Redundancy Protocol (VRRP)
