debug ip msdp
Turn on MSDP debugging.
Z9500
Syntax
debug ip msdp {event
peer address
| packet
peer address
| pim}
To turn debugging off, use the
no debug ip msdp {event
peer address
|
packet
peer address
| pim}
command.
Parameters
event
peer
address
Enter the keyword
event
then the peer address in a dotted
decimal format (A.B.C.D.).
packet
peer
address
Enter the keyword
packet
then the peer address in a dotted
decimal format (A.B.C.D.).
pim
Enter the keyword
pim
to debug advertisement from PIM.
Defaults
Not configured.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
6.2.1.1
Introduced
ip msdp cache-rejected-sa
Enable an MSDP cache for the rejected source-active entries.
Z9500
Syntax
ip msdp cache-rejected-sa {
number
}
Multicast Source Discovery Protocol (MSDP)
1219
