L2PT : 0
IpMacAcl : 0
VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 2
-- linecard 2 --
Current Settings(in block sizes)
1 block = 256 entries
L2Acl : 4
Ipv4Acl : 4
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 0
ipv4pbr : 0
vrfv4Acl : 0
Openflow : 0
fedgovacl : 0
nlbclusteracl: 2
Dell#
test cam-usage
Verify the CAM space that is available for IPv4 and IPv6 CAM profiles, and particularly to verify if enough
CAM space is available for the IPv6 ACLs you use in a policy map.
Z9500
Syntax
test cam-usage service-policy input
policy-map-name
linecard
{
number
portset {
port-pipe-number
} | all}
Parameters
input
policy-
map-name
Enter the name of the policy map to verify. Maximum is 32
characters.
linecard
number
portset
port-pipe-
number
Enter a line card and port-pipe number to check CAM usage
on specified ports. The range of valid port-pipe numbers is 0
to 3. Enter
linecard all
to verify the CAM space available
for all ports on the switch.
Defaults
none
Command
Modes
EXEC Privilege
Content Addressable Memory (CAM)
585
