Primary : 10
Isolated : 30
Community : 20
Usage
Information
Note that if the VLAN ID you enter is a primary VLAN, the entire private VLAN
output is displayed, as shown below. If the VLAN ID is a secondary VLAN, only its
primary VLAN and secondary VLAN properties are displayed, as shown in the
second Example below.
Example
Dell# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Te 2/1,3
102 isolated Yes Te 0/4
101 community Yes Te 2/7-10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Te 0/2
102 Isolated Yes Te 0/4
Related
Commands
private-vlan mode
– sets the mode of the selected VLAN to community, isolated,
or primary.
show interfaces private-vlan
– displays type and status of PVLAN interfaces.
switchport mode private-vlan
– sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
Z9500
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the
no switchport mode
private-vlan
command.
Parameters
host
Enter the keyword
host
to configure the selected port or
port channel as an isolated interface in a PVLAN.
promiscuous
Enter the keyword
promiscuous
to configure the selected
port or port channel as an promiscuous interface.
trunk
Enter the keyword
trunk
to configure the selected port or
port channel as a trunk port in a PVLAN.
1454
Private VLAN (PVLAN)
