Version
Description
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
A route reflector reflects routes to the neighbors assigned to the cluster. Neighbors
in the cluster do not need not to be fully meshed. By default, when you use
no
route reflector
, the internal BGP (IBGP) speakers in the network must be fully
meshed.
The first time you enter this command, the router configures as a route reflector
and the specified BGP neighbors configure as clients in the route-reflector cluster.
When you remove all clients of a route reflector using the
no neighbor route-
reflector-client
command, the router no longer functions as a route
reflector.
If the clients of a route reflector are fully meshed, you can configure the route
reflector to not reflect routes to specified clients by using the
no bgp client-
to-client reflection
command.
Related
Commands
bgp client-to-client reflection
— enables route reflection between the route
reflector and the clients.
neighbor send-community
Send a COMMUNITY attribute to a BGP neighbor or peer group. A COMMUNITY attribute indicates that
all routes with that attribute belong to the same community grouping.
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} send-community
To disable sending a COMMUNITY attribute, use the
no neighbor {
ip-address
|
peer-group-name
} send-community
command.
Parameters
ip-address
Enter the IP address of the peer router in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to send a COMMUNITY
attribute to all routers within the peer group.
extended
Optional. Enter the keyword
extended
to send extended
community attribute.
standard
Optional. Enter the keyword
standard
to send standard
community attribute.
Defaults
Not configured and COMMUNITY attributes are not sent to neighbors.
Border Gateway Protocol
431
