fragments
Enter the keyword
fragments
to use ACLs to control packet
fragments.
Defaults
Not configured.
Command
Modes
CONFIGURATION-EXTENDED-ACCESS-LIST
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.3.1.0
Added the keyword
dscp
.
8.2.1.0
Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
7.4.1.0
Added support for non-contiguous mask and added the
monitor
option. Deprecated the keyword
established
.
6.5.10
Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage
Information
Use the
order
option only when you use policy-based QoS on the switch. For
more information, refer to the Quality of Service chapter in the
Z9500
Configuration Guide
.
When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP
may become busy as it has to log these packet details.
Use the
monitor
option only when you are using flow-based monitoring. For
more information, refer to the Port Monitoring chapter in the
Z9500 Configuration
Guide
.
NOTE: When ACL logging and byte counters are configured simultaneously,
byte counters may display an incorrect value. Configure packet counters with
logging instead.
254
Access Control Lists (ACL)
