Dell#
User
Information
The following describes the
show interfaces port-channel brief
command shown in the following example.
Field
Description
LAG
Lists the port channel number.
Mode
Lists the mode:
• L3 — for Layer 3
• L2 — for Layer 2
Status
Displays the status of the port channel.
• down — if the port channel is disabled (
shutdown
)
• up — if the port channel is enabled (
no shutdown
)
Uptime
Displays the age of the port channel in
hours:minutes:seconds.
Ports
Lists the interfaces assigned to this port channel.
(untitled)
Displays the status of the physical interfaces (up or down).
• In Layer 2 port channels, an * (asterisk) indicates which
interface is the primary port of the port channel. The
primary port sends out interface PDU.
• In Layer 3 port channels, the primary port is not
indicated.
Example
Dell#sh int por 1 br
LAG Mode Status Uptime Ports
1 L2 up 00:00:08 Te 2/0 (Up) *
Te 2/1 (Down)
Te 2/2 (Up)
Dell#
Related
Commands
show lacp
— displays the LACP matrix.
show port-channel-flow
Display an egress port in a given port-channel flow.
Z9500
Syntax
show port-channel-flow outgoing-port-channel
number
incoming-
interface
interface
{source-ip
address
destination-ip
address
}
| {source-port
number
destination-port
number
} | {source-mac
address
destination-mac
address
{vlan
vlanid
| ether-type}}
Interfaces
901
