Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
9.1.(0.0)
Introduced on the S4810 and Z9000.
8.3.19.0
Introduced on the S4820T.
7.8.1.0
Added support for the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage
Information
Setting a priority of 0 makes the router ineligible for election as a Designated
Router or Backup Designated Router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.
ipv6 router ospf
Enable OSPF for IPv6 router configuration.
Z9500
Syntax
ipv6 router ospf
process-id
[vrf
vrf-name
]
To exit OSPF for IPv6, use the
no ipv6 router ospf
process-id
command.
Parameters
process-id
Enter the process identification number. The range is from 1
to 65535.
vrf
vrf-name
(Optional) Enter the keyword vrf followed by the name of the
VRF to install IPv6 routes in that VRF.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3)
1353
