Version
Description
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
Usage
Information
When you enter
no fefd
for an interface and fefd-global, FEFD is enabled on the
interface because the
no fefd
command is not retained in the configuration file.
To keep the interface FEFD disabled when the global configuration changes, use
the
fefd reset
command.
Related
Commands
•
fefd reset
— enables FEFD globally on the system.
•
fefd mode
— changes FEFD mode on an interface.
fefd interval
Set an interval between control packets.
Z9500
Syntax
fefd interval
seconds
To return to the default value, use the
no fefd interval
command.
Parameters
seconds
Enter a number as the time between FEFD control packets.
The range is from 3 to 300 seconds. The default is
15
seconds
.
Defaults
15 seconds
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
Related
Commands
•
fefd
— enables far-end failure detection.
Layer 2
1167
