Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2.(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.10.0
Introduced on the S4810.
8.4.1.0
Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default
VRF instances.
8.3.2.0
Introduced on the E-Series TeraScale.
Usage
Information
If no options are specified, debug is active on all interfaces and all VRRP groups.
show vrrp ipv6
View the IPv6 VRRP groups that are active. If no VRRP groups are active, the Dell Networking OS returns
No Active VRRP group
.
Syntax
show vrrp ipv6 [
vrid
] [
interface
] [brief] [vrf
vrf-name
]
Parameters
vrid
(OPTIONAL) Enter the virtual router identifier for the VRRP
group to view only that group. The range is from 1 to 255.
interface
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a port channel interface, enter the keywords
port-
channel
then a number.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
brief
(OPTIONAL) Enter the keyword
brief
to view a table of
information on the VRRP groups.
vrf
vrf-name
Enter the keyword vrf followed by the name of the VRF to
view IPv6 VRRP groups corresponding to that VRF.
Command
Modes
• EXEC
1902
Virtual Router Redundancy Protocol (VRRP)
