•
ack
= acknowledgement
•
fin
= finish (no more data from the user)
•
psh
= push function
•
rst
= reset the connection
•
syn
= synchronize sequence number
•
urg
= urgent field
operator
(OPTIONAL) For TCP and UDP parameters only. Enter one of
the following logical operand:
•
eq
= equal to
•
neq
= not equal to
•
gt
= greater than
•
lt
= less than
•
range
= inclusive range of ports (you must specify two
ports for the
port
command parameter.)
Defaults
none
Command
Modes
REDIRECT-LIST
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.4(0.0)
Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1
Introduced on the C-Series and S-Series.
8.4.2.0
Introduced on the E-Series TeraScale.
7.5.1.0
Introduced on the E-Series ExaScale.
redirect
Configure a rule for the redirect list.
Z9500
Syntax
redirect {
ip-address
|
slot/port
} |
tunnel tunnel-id
}[track
<obj-id>
]{
ip-protocol-number
|
protocol-type
[
bit
]} {
source
Policy-based Routing (PBR)
1427
