Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.11.1
Introduced on the Z9000.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
To configure a COMMUNITY attribute, use the
set community
command in
ROUTE-MAP mode.
Before using this command, you must execute the
clear ip bgp
command.
neighbor shutdown
Disable a BGP neighbor or peer group.
Z9500
Syntax
neighbor {
ip-address
|
peer-group-name
} shutdown
To enable a disabled neighbor or peer group, use the
neighbor {
ip-address
|
peer-group-name
} no shutdown
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to disable or enable all
routers within the peer group.
Defaults
Enabled (that is, BGP neighbors and peer groups are disabled.)
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
432
Border Gateway Protocol
