• The display output is sorted by prefixes; intra-area ECMP routes are not
displayed together.
• For Type 2 external routes, Type 1 cost is not displayed.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Te 0/47 1 Intra-Area
13.0.0.0 1 0.0.0.0 Te 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Te 0/47 - External
172.30.1.0 2 13.0.0.3 Te 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
Z9500
Syntax
show ip ospf [
process-id
| vrf
vrf-name
] statistics global |
[interface
name
{neighbor
router-id
}]
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
vrf
vrf-name
Enter the keyword
vrf
followed by the name of the VRF to
display statistics corresponding to the OSPF process that is
tied to a specific VRF.
global
Enter the keyword
global
to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
interface
name
(OPTIONAL) Enter the keyword
interface
then one of the
following interface keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a port channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 512.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
neighbor
router-id
(OPTIONAL) Enter the keyword
neighbor
then the
neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults
none
Open Shortest Path First (OSPFv2 and OSPFv3)
1323
