IES6200-PN-16T4GS-2P48
Managed PROFINET Industrial
Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【
Package Checklist
】
Please check the integrity of package and accessories while
first using the switch.
1 Industrial Ethernet switch
2. DIN-Rail mounting attachment
3. Certification
4. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
This product is 20-port 100M/Gigabit managed DIN-Rail
PROFINET industrial Ethernet switch. The model:
IES6200-PN-16T4GS-2P48 (4 Gigabit SFP fiber ports + 16
100M copper ports + 2 12~48VDC power supplies).
【
Panel Design
】
Front view and right view
Rear view, Bottom view and Top view
1.
Device running status indicator RUN
2.
Power supply indicator P1/P2
3.
Relay alarm status indicator ALM
4.
Gigabit fiber port (SFP slot)
5.
Gigabit fiber port indicator
6.
100M copper port
7.
100M copper port indicator
8.
DIN-Rail mounting kit
9.
Power input terminal (PWR1, PWR2)
10.
Grounding screw (Protective grounding)
11.
Relay alarm output terminal block (2 pins)
12.
Console port
13.
DIP switch
【
Mounting Dimension
】
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
The product adopts 35mm standard DIN-Rail mounting which
is suitable for most industrial scenes, mounting steps as
follows:
Check if the DIN-Rail mounting kit is installed firmly.
Clip the upper part of the DIN-Rail mounting kit, i.e.
the fixed side, into the DIN rail.
Press the lower side of the device and insert the
lower part of DIN-Rail mounting kit (the side with