n]:
Dell#
router ospf
To configure an OSPF instance, enter ROUTER OSPF mode.
Z9500
Syntax
router ospf
process-id
[vrf {
vrf name
}]
To clear an OSPF instance, use the
no router ospf process-id
command.
Parameters
process-id
Enter a number for the OSPF instance. The range is from 1 to
65535.
vrf name
(Optional) E-Series Only: Enter the VRF process identifier to
tie the OSPF instance to the VRF. All network commands
under this OSPF instance are then tied to the VRF instance.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
9.1(0.0)
Added support for OSPFv3 on the S4810 and Z9000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.9.1.0
Added support for VRF.
7.8.1.0
Added support for Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
Usage
Information
You must have an IP address assigned to an interface to enter ROUTER OSPF mode
and configure OSPF.
Open Shortest Path First (OSPFv2 and OSPFv3)
1295
