access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Z9500
Syntax
access-class
access-list-name
To delete a setting, use the
no access-class
command.
Parameters
access-list-
name
Enter the name of an established IP Standard ACL.
Defaults
Not configured.
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Related
Commands
line
— applies an authentication method list to the designated terminal lines.
ip access-list standard
— names (or selects) a standard access list to filter based on
the IP address.
ip access-list extended
— names (or selects) an extended access list based on the
IP addresses or protocols.
1614
Security
