Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.5.1.0
Introduced.
Usage
Information
By default, all VLANs are mapped to MST instance zero (0) unless you use the
vlan
range
command to map it to a non-zero instance.
name
The name you assign to the multiple spanning tree region.
Z9500
Syntax
name
region-name
To remove the region name, use the
no name
command.
Parameters
region-name
Enter the MST region name. The range is 32 character limit.
Defaults
no default name.
Command
Modes
MULTIPLE SPANNING TREE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
1240
Multiple Spanning Tree Protocol (MSTP)
