flash://ADMIN_DIR/ssh/authorized-keys-username
(where
username
is
the user associated with this terminal).
NOTE: The
no
form of this command deletes the file
flash://ADMIN_DIR/
ssh/ authorized-keys-username
file.
Related
Commands
show ip ssh rsa-authentication
— displays the RSA authorized keys.
ip ssh rsa-authentication (Config)
— enables RSA authentication.
ip ssh server
Configure an SSH server. The SSH server is enabled by default.
Z9500
Syntax
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
ip ssh server {ciphers
cipher-list
} {enable | port
port-number
}
[kex
key-exchange-algorithm
] [mac
hmac-algorithm
] [version {1 |
2}]
To disable SSH server functions, use the
no ip ssh server {ciphers
cipher-list
} {enable | port
port-number
} [kex
key-exchange-
algorithm
] [mac
hmac-algorithm
] [version {1 | 2}]
command.
Parameters
enable
Enter the key word
enable
to start the SSH server.
ciphers
cipher-
list
Enter the keyword
ciphers
and then a space-delimited list
of ciphers that the SSH server supports.
The following ciphers are available.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
The default cipher list is used.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
Security
1665
