Defaults
seconds =
10
;
level-1
(if not otherwise specified)
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
Usage
Information
The default values of this command are typically satisfactory transmission times for
a specific interface on a designated intermediate system. To maintain database
synchronization, the designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.
isis hello-interval
Specify the length of time between hello packets sent.
Z9500
Syntax
isis hello-interval
seconds
[level-1 | level-2]
To return to the default values, use the
no isis hello-interval [
seconds
]
[level-1 | level-2]
command.
Parameters
seconds
Allows you to set the length of time between hello packet
transmissions. The range is from 1 to 65535. The default is
10
.
level-1
(OPTIONAL) Select this value to configure the hello interval
for Level 1. This value is the default.
level-2
(OPTIONAL) Select this value to configure the hello interval
for Level 2.
1086
Intermediate System to Intermediate System (IS-IS)
