Example
(Multicast)
mac-address-table static 01:00:5E:01:00:01 {multicast vlan
2
output—range
Te 1/2,Te 1/3
}
Related
Commands
show mac-address-table
— displays the MAC address table.
mac-address-table station-move refresh-arp
Ensure that address resolution protocol (ARP) refreshes the egress interface when a station move occurs
due to a topology change.
Z9500
Syntax
[no] mac-address-table station-move refresh-arp
Defaults
none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series.
Usage
Information
For details about using this command, refer to the “NIC Teaming” section of the
Layer 2 chapter in the
Dell Networking OS Configuration Guide
.
mac learning-limit
Limit the maximum number of MAC addresses ( dynamic) learned on a selected interface.
Z9500
Syntax
mac learning-limit
address_limit
[vlan
vlan-id
] [station-move-
violation [dynamic]] [dynamic [no-station-move| station-move]]
Parameters
address_limit
Enter the maximum number of MAC addresses that can be
learned on the interface. The range is from 1 to 1000000.
Layer 2
1141
