ip address
Enter an IP address, in dotted decimal format, to be mapped
to the name.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced for the E-Series.
ip max-frag-count
Set the maximum number of fragments allowed in one packet for packet re-assembly.
Z9500
Syntax
ip max-frag-count
count
To place no limit on the number of fragments allowed, use the
no ip max-frag-
count
command.
Parameters
count
Enter a number for the number of fragments allowed for re-
assembly. The range is from 2 to 256.
Defaults
No limit is set on number of fragments allowed.
Command
Modes
CONFIGURATION
IPv4 Routing
949
