Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
Usage
Information
The
shutdown
command marks a physical interface as unavailable for traffic. To
discover if an interface is disabled, use the
show ip interface brief
command. Disabled interfaces are listed as down.
Disabling a VLAN or a port channel causes different behavior. When a VLAN is
disabled, the Layer 3 functions within that VLAN are disabled. Layer 2 traffic
continues to flow. Entering the
shutdown
command on a port channel disables all
traffic on the port channel and the individual interfaces within the port channel. To
enable a port channel, enter
no shutdown
on the port channel interface and at
least one interface within that port channel.
The
shutdown
and
description
commands are the only commands that you
can configure on an interface that is a member of a port channel.
Related
Commands
interface port-channel
— creates a port channel interface.
interface vlan
— creates a VLAN.
show ip interface
— displays the interface routing status. Add the keyword
brief
to display a table of interfaces and their status.
speed (Management interface)
Set the speed for the Management interface.
Z9500
Syntax
speed {10 | 100 | auto}
To return to the default setting, use the
no speed {10 | 100}
command.
Parameters
10
Enter the keyword
10
to set the interface’s speed to 10 Mb/s.
100
Enter the keyword
100
to set the interface’s speed to 10/100
Mb/s.
884
Interfaces
