Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.3.1.0
On the E-Series, available in INTERFACE VLAN context,
reduced the minimum aging time in the INTERFACE VLAN
context from 10 seconds to 1 second.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Related
Commands
mac learning-limit
— sets the MAC address learning limits for a selected interface.
show mac-address-table aging-time
— displays the MAC aging time.
mac-address-table static
Associate specific MAC or hardware addresses to an interface and VLANs.
Z9500
Syntax
mac-address-table static
mac-address
{multicast vlan
vlan-id
output—range
interface
}{
output interface
vlan
vlan-id
}
To remove a MAC address, use the
no mac-address-table static
mac-
address
output
interface
vlan
vlan-id
command.
Parameters
mac-address
Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn
format.
multicast
Enter a vlan port to where L2 multicast MAC traffic is
forwarded.
NOTE: Use this option if you want multicast functionality
in an L2 VLAN without IGMP protocols.
output
interface
For a unicast MAC address, enter the keyword
output
then
one of the following interfaces for which traffic is forwarded:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
Layer 2
1139
