Version
Description
9.7(0.0)
Introduced on the Z9500.
Usage
Information
By default, iSCSI is enabled on the unit and the flow control is enabled on all of the
interfaces. It is also acts as defaults when the link-level flow control is enabled on
one or more interfaces. To enable DCB, do one of the following:
• Apply the
dcb-map
command with the
no pfc-mode
command on to all the
interfaces.
• Disable flow-control on all of the interfaces.
PFC Commands
The following PFC commands are supported on the Z9500 platform.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or linecard.
Syntax
clear pfc counters [port-type slot/port | linecard {
unit number
| all } all backplane all}]
Parameters
port-type
Enter the keywords
port-type
then the slot/port
information.
linecard
unit
number
Enter the keyword
linecard
to clear the linecard number.
all backplane
all
Enter the keywords
all backplane all
to clear the
counters on all interfaces.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the Z9500.
Data Center Bridging (DCB)
607
