show ip community-lists
— displays configured IP Community access lists.
set automatic-tag
To automatically compute the tag value of the route, configure a filter.
Z9500
Syntax
set automatic-tag
To return to the default, enter
no set automatic-tag
.
Defaults
Not configured.
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Related
Commands
set level
— specify the OSPF area for route redistribution.
set metric
— specify the metric value assigned to redistributed routes.
set metric-type
— specify the metric type assigned to redistributed routes.
set tag
— specify the tag assigned to redistributed routes.
320
Access Control Lists (ACL)
