Version
Description
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.3.1.0
Introduced on the E-Series.
8.2.1.0
Introduced on the C-Series and S-Series.
Related
Commands
show ip dhcp snooping
— displays the contents of the DHCP binding table.
debug ipv6 dhcp
To enable debug logs for DHCPv6 relay agent transactions.
Syntax
debug ipv6 dhcp
To disable the debug logs for dhcpv6 relay agent transactions, use the
debug
ipv6 dhcp
command.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command-Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S4810, S4820T, S6000 and Z-Series.
debug ip dhcp client events
Activate the debugging and display of log messages on DHCP client interfaces for IP address acquisition,
IP address release, and IP address and lease time renewal.
Z9500
Syntax
debug ip dhcp client events [interface
type
slot
/
port
]
Parameters
interface
typeslot/port
Enter the keyword
interface
with the interface type and
slot/port information to display DHCP event messages for a
specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
.
704
Dynamic Host Configuration Protocol (DHCP)
