show license
Check the status of a Z9500 license and display the number of usable ports or verify a license stored on a
remote server before you install it.
Z9500
Syntax
show license [flash://
filepath
| ftp://
userid:password@host-ip/
filepath
| scp://
userid:password@hostip/filepath
| tftp://
host-
ip/filepath
| usbflash://
filepath
]
Parameters
flash://
filepath
Enter
flash://
filepath
to display a license stored in a
local flash directory on the switch.
ftp://
userid:passwor
d@host-ip/
filepath
Enter
ftp://
userid:password@host-ip/filepath
to
display a license stored on a remote file server using FTP.
scp://
userid:passwor
d@hostip/
filepath
Enter
scp://
userid:password@hostip/filepath
to
display a license stored on a remote file server using secure
copy.
tftp://
host-ip/
filepath
Enter
tftp://
host-ip/filepath
to display a license
stored on a remote file server using TFTP.
usbflash://
filepath
Enter
usbflash://
filepath
to display a license stored on
an external flash device.
Defaults
None
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.5(0.1)
Introduced on the Z9500.
Usage
Information
In the
show license
command syntax,
host-ip
is either an IPv4 dotted decimal
address or an IPv6 [x:x:x:x::x] format address.
The following examples show sample output.
Pay As You Grow
1371
