To return to the default value, use the
no ip ospf hello-interval
command.
Parameters
seconds
Enter the number of seconds for the interval. The range is
from 1 to 65535. The default is
10 seconds
.
Defaults
10 seconds
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.1
Introduced on the E-Series.
Usage
Information
The time interval between the hello packets must be the same for routers in a
network.
Related
Commands
ip ospf dead-interval
— sets the time interval before a router is declared dead.
ip ospf message-digest-key
Enable OSPF MD5 authentication and send an OSPF message digest key on the interface.
Z9500
Syntax
ip ospf message-digest-key
keyid
md5
key
To delete a key, use the
no ip ospf message-digest-key
keyid
command.
Parameters
keyid
Enter a number as the key ID. The range is from 1 to 255.
key
Enter a continuous character string as the password.
Defaults
No MD5 authentication is configured.
Open Shortest Path First (OSPFv2 and OSPFv3)
1279
