privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
Z9500
Syntax
privilege
mode
{level
level command
| reset
command
}
To delete access to a level and command, use the
no privilege mode level
level command
command.
Parameters
mode
Enter one of the following keywords as the mode for which
you are controlling access:
•
configure
for CONFIGURATION mode
•
exec
for EXEC mode
•
interface
for INTERFACE modes
•
line
for LINE mode
•
route-map
for ROUTE-MAP mode
•
router
for ROUTER OSPF, ROUTER RIP, ROUTER ISIS
and ROUTER BGP modes
level
level
Enter the keyword
level
then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes and commands.
reset
Enter the keyword
reset
to return the security level to the
default setting.
command
Enter the command’s keywords to assign the command to a
certain access level. You can enter one or all of the
keywords.
Defaults
Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
Security
1607
