show ipv6 cam linecard
Displays the IPv6 CAM entries for the specified line card and port pipe.
Z9500
Syntax
show ipv6 cam linecard
slot-id
port-set {0-3} [summary |
ipv6–
address
]
Parameters
line card
slot-id
Enter the slot ID of the line card. The range of Z9500 slot IDs
is from 0 to 2.
port-set
Enter the keyword
port—set
followed by the port-pipe
number. The range of Z9500 port-pipe numbers is: 0 to 2 on
line card 0; 0 to 3 on line cards 1 and 2.
summary
(OPTIONAL) Enter the keyword
summary
to display a table
listing network prefixes and the total number prefixes which
can be entered into the IPv6 CAM.
ipv6-address
Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults
none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0)
Introduced on the Z9500.
Version 9.0.0.0
Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.1
Introduced on the S4810.
Version 8.4.2.1
Introduced on the S-Series.
1030
IPv6 Basics
