bridge-priority
Set the bridge priority of the switch in an IEEE 802.1D spanning tree.
Z9500
Syntax
bridge-priority {
priority-value
| primary | secondary}
To return to the default value, use the
no bridge-priority
command.
Parameters
priority-value
Enter a number as the bridge priority value. The range is
from 0 to 65535. The default is
32768
.
primary
Enter the keyword
primary
to designate the bridge as the
root bridge.
secondary
Enter the keyword
secondary
to designate the bridge as a
secondary root bridge.
Defaults
priority-value =
32768
Command
Modes
SPANNING TREE (The prompt is “config-stp”.)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.2.1.1
Introduced on the E-Series.
Spanning Tree Protocol (STP)
1769
