Parameters
percentage
Trigger threshold (in percentage of link-bundle bandwidth)
at which an SNMP trap is generated. Valid values are 1 to 90.
Command
Modes
CONFIGURATION
Command
History
Version
Description
9.2.1.0
Introduced on the Z9500 switch.
9.3.0.0
Introduced on the Z9000 platform.
Defaults
The default trigger-threshold value is 60.
Usage
Information
The trigger-threshold of bandwidth usage, which determines when the calculation
of link-bundle utilization is performed, is set at 60 percent of the link-bundle
bandwidth. When the total traffic use (mean) is below the trigger-threshold
percentage, unevenness in link-bundle traffic distribution is not reported. If traffic
unevenness is detected in three consecutive measurements, an alarm is issued. The
time interval between measurements is defined by the rate interval for HiGig link
polling (default 15 seconds).
show hardware hg-stats
Display the traffic statistics from internal ports in a HiGig link bundle/port channel on a line-card or
switch fabric module (SFM) NPU.
Z9500
Syntax
show hardware {sfm
npu-id
| linecard
slot
} hg-stats {port
hg-
port—number
| unit
npu-id
port
hg-port—number
}
Parameters
sfm
npu-id
Specify a Z9500 SFM (spine) NPU by entering the keyword
sfm
and SFM NPU ID. Valid SFM NPU IDs are 0 to 5.
linecard
slot
Specify a Z9500 line-card (leaf) NPU by entering the
keyword
linecard
and line-card slot. Valid slot numbers
are 0 to 2.
hg-stats {port
hg-port-
number
| unit
npu-id
port
hg-
port-number
}
Enter the keyword
hg-stats
to display HiGig port statistics.
For an SFM NPU HiGig link bundle, specify only a HiGig port
number. Valid SFM
hg-port-number
values are 1 to 22.
For a line-card NPU HiGig link bundle, specify an NPU ID and
a HiGig port number. Line-card NPUs range from 0 to 3.
Line-card HiGig port numbers range from 50 to 61.
Defaults
none
Interfaces
907
